SFIC Pin Ejector/Decoder
SFIC pin ejector/decoder tool.
Once the pin stacks are ejected, they are kept in place in
slots in the decoder block, and can be measured easily.
A control key can then be cut that can remove other
cores in the system.
These pins are for a six pin lock, mastered at the
operating shear line with a TPP format and not
mastered at the control shear line. Note that each
pin stack has four segments (producing two operating cuts
and one control cut).
Image taken with a Nikon D-100 digital camera with a Nikkor
85mm 1:2.8D tilt/shift macro lens (with Kenko extension tube).
Lit by electronic flash and various reflectors.
Copyright © 2003 by Matt Blaze. All rights reserved.
You may not copy, modify or use this image for any commercial or
non-commercial purpose without permission.
Click here for the index of Best SFIC lock photos.
Click here for my home page.